Sanyo PLV-55WM1 - Manual (Page 42)

42
Language
The language used in the On-Screen Menu is available in English
German, French, Italian, Spanish, Portuguese, Dutch and Swedish.
Display
This function decides whether to display On-Screen Displays.
Press the Point Left / Right button to switch On / Off.
On ···· show all the On-Screen Displays.
Off ···· do not show On-Screen Displays except;
● On-Screen Menu
● “No signal” message
●”Please wait...!” message
Blue back
When this function is “On,” the LCD Projection Monitor projects a
blue image on screen while no input signal is detected.
Press the Point Left / Right button to switch On / Off.
Setting Menu (Language)
Setting
Menu position
Background color
This function is used to change the image of the On-Screen Menu
display
Menu position
This function is used to change the position of the On-Screen Menu.
Move it with the Point Up / Down / Left / Right button and press the
SELECT button to set it.
Select the Setting Menu with the Point Up / Down button, and
then press the Point Right button to enter the sub-menu.
Select an item with the Point Up / Down button to set various
settings.
1
2
After selecting a language,
move the pointer to this icon,
and press the SELECT button
to activate it.
This arrow indicates that there
are other items. Select this
item and press the Point Down
button to go to the next item.
No operation shut off timer
This function turns off the LCD Projection Monitor automatically when
there is no operation of the remote control or the front panel for 3
hours.
While this function is "On" and no operation continues for 3 hours, the
message "Set shut down" will be displayed for about 1 minute, and
the LCD Projection Monitor will shut off automatically.(in stand-by
mode)
Press the Point Left / Right button to switch On / Off.
Setting