Star Trac SPINNING 727-0083 - Manual (Page 16)

13
4. Place the battery back in the cadence upside down to reset the system. Do not put the lid
back on yet.
Battery facing
upside down
→
Battery facing
← right side up
5. Activate Sync Mode on the computer by holding down the Light
and Toggle buttons for several seconds until the window displays
“Conn“ Sync
Mode
window
6. Remove the cadence sensor battery and place it back in correctly (battery face will be right
side up).
7. Replace the battery cover on the cadence sensor.
Note: To put the cadence sensor battery cover on
correctly, align the arrows before locking shut.
Syncing Process – cont’d