Sony DVP-NS700V - Manual (Page 17)

Ge
tti
ng S
ta
rte
d
17
To change the colour system
The colour system of the player is set to NTSC or PAL. If the on-screen display of the player
does not appear on the TV, change the colour system of the player to the same colour system
(PAL or NTSC) of your TV. To change the colour system, hold POWER down while pressing
X on the player. The power indicator lights up in green and changes to red. Then release X.
z This player switches the colour system, PAL or NTSC, according to the connected TV. To check the colour
system of the player, press POWER on the player and then press [/1 on the remote. The power indicator lights up
in green. When “NTSC” appears on the front panel display, the colour system of the player is set to NTSC. When
“NTSC” does not appear, the colour system is set to PAL.