C-2 c-1, Hook ups, Continued – Sony DVP-NS700V User Manual
Page 25
Hook
ups
25
This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use
. If the
amplifier (receiver) has a digital input jack, use
. When connecting to an MD deck or a DAT
deck, use
. In this case, you can also connect the player directly to the MD deck or DAT
deck without using your stereo amplifier (receiver).
x
Recommended surround sound effects for the
connection only
•
TVS STANDARD (page 56)
z
In connection
, you can use the supplied audio/video cord instead of using a separate audio cord.
z
To realize better surround sound effects, make sure that your listening position is in between your speakers.
Note
SACD audio signals are not output from the digital jack.
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to an
MD deck or DAT deck
C
C-1
C-2
C-2
C-1
C-1
W O O F E R
L
R
FRONT
REAR
C E N T E R
LINE OUT
R – AUDIO 2 – L VIDEO 2
R – AUDIO 1 – L VIDEO 1
1
2
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL OPTICAL
S VIDEO
OUT
5.1CH OUTPUT
COMPONENT
VIDEO OUT
Y
C
B
C
R
DIGITAL OUT
C-2
C-1
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL OPTICAL
DIGITAL OUT
LINE OUT
R – AUDIO 2 – L VIDEO 2
R – AUDIO 1 – L VIDEO 1
l
: Signal flow
SACD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front
(L)
Front
(R)
[Speakers]
(white)
(red)
(white)
(red)
Coaxial digital cord
(not supplied)
Stereo audio cord
(not supplied)
to audio input
to coaxial or optical digital input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
or
continued