Sony DVP-NS700V - Manual (Page 56)

56
The display examples are as follows:
•
PCM (stereo)
•
Dolby Surround
•
Dolby Digital 5.1ch
When an LFE signal component is output,
“LFE” is enclosed in a solid line. When an
LFE signal component is not output, “LFE”
is enclosed in a broken line.
•
MPEG
•
DTS
When an LFE signal component is output,
“LFE” is enclosed in a solid line. When an
LFE signal component is not output, “LFE”
is enclosed in a broken line.
z When the signal contains rear signal components
such as “LS”, “RS”, or “S”, the surround effect is
enhanced (page 56).
SURROUND Mode Settings
You can enjoy surround sounds while
playing discs including Dolby Digital, DTS,
and MPEG audio DVDs, even if you have
only 2 or 4 speakers. Select the surround
mode that best suits your speaker setup.
1
Press DISPLAY during playback.
The Control Menu appears.
2
Press X/x to select
(SURROUND), then press ENTER.
The options for “SURROUND” appear.
PCM 96kHz 24bit
PROGRAM FORMAT
L R
DOLBY SURROUND
DOLBY DIGITAL 2/0
L R C
S
PROGRAM FORMAT
L R C
DOLBY DIGITAL 3/2.1
PROGRAM FORMAT
LFE
LS RS
L R
MPEG 2/2
PROGRAM FORMAT
LS RS
L R C
DTS 3/2.1
PROGRAM FORMAT
LFE
LS RS
ENTER
X / x
DISPLAY
SURROUND
OFF
TVS DYNAMIC
TVS WIDE
OFF
1 8 ( 3 4 )
1 2 ( 2 7 )
T 1 : 3 2 : 5 5
DVD VIDEO
PLAY