Sony DVP-NS700V - Manual (Page 72)

72
RMT-D131A Controlling the TV
When you set the TV/DVD switch to TV, you
can control the following items with the
supplied remote.
∗
If you use number buttons to select the TV’s
programme position, press -/-- followed by the
number buttons for two-digit numbers.
1
Slide the TV/DVD switch to DVD.
2
Hold down [/1, and enter your AV
amplifier (receiver)’s manufacturer’s
code (see the table below) using the
number buttons.
3
Release [/1.
Manufacturer Code
number
Sony (default) 01
Akai 04
AOC 04
Centurion 12
Coronado 03
Curtis-Mathes 12
Daytron 12
Emerson 03,04,14
Fisher 11
General Electric 06,10
Gold Star 03,04,17
Hitachi 02,03
J.C.Penney 04,12
JVC 09
KMC 03
Magnavox 03,08,12
Marantz 04,13
MGA/
Mitsubishi 04,12,13,
17
NEC 04,12
Panasonic 06,19
Philco 03,04
Philips 08,21
Pioneer 16
Portland 03
Quasar 06,18
Radio Shack 05,14
RCA 04,10
Sampo 12
Samsung 20
Sanyo 11
Scott 12
Sears 07,10,11
Sharp 03,05,18
Sylvania 08,12
Teknika 03,08,14
Toshiba 07
Wards 03,04,12
Yorx 12
Zenith 15
Manufacturer Code
number
By pressing You can
[/1 Turn the TV on or off
VOL +/– Adjust the volume of the TV
WIDE MODE Switch to or from the wide mode
of a Wide TV (Sony’s wide TV
only for RMT-D131A)
TV/VIDEO Switch the TV’s input source
between the TV and player
The button works even if the
TV/DVD switch is set to DVD.
RMT-D131E
and D131O only
Number buttons,
-/--*
Select the programme position
of the TV
RMT-D131A only
Number buttons,
ENTER
Select the channel of the TV
Controlling the volume of your AV
amplifier (receiver) with the remote
1 2 3
4 5 6
7 8 9
0 -/--
Number
buttons
[/1
VOL +/–
TV/DVD
switch