Sony IPELA SNC-P1 - Manual (Page 18)

O
per
at
ing
t
he
Came
ra
Logging in to Homepage — Welcome Page
18
2
Click Setting on the welcome page.
The following dialog appears.
3
Enter the user name and password for
Administrator, then click OK.
The user name “admin” and the password “admin”
are set at the factory for the Administrator. You can
change them in the User setting menu of the
Advanced mode menu (see page 41).
The Advanced mode menu appears in another
window.
About Viewers
You can use the following viewer according to the Video
mode setting in the camera setting menu of the
Advanced mode menu (page 34).
ActiveX viewer
This viewer can monitor the image in both MPEG4 and
JPEG video modes.
You must install this viewer when you access to the main
viewer at the first time.
When you display the main viewer of the
camera for the first time
When you log in the network camera using ActiveX
viewer for the first time (clicking Enter to enter the
main viewer), the Security Warning appears. Click Yes
and install ActiveX Control. You can use all the
functions of the viewer by using ActiveX Control.
Java applet viewer
You can select this viewer when the camera video mode
is set to JPEG. The frame rate is lower than the ActiveX
viewer.
The Java applet viewer operates only when Java is
installed and Java (Sun) is enabled. If it does not operate
correctly, check whether the effective Java version has
been installed successfully and Java (Sun) is enabled.
Effective versions: Java Plug-in Ver. 1.6.0_01
To check the Java version
Select Tools from the menu bar of Internet Explorer,
then select Internet Options and click the Advanced
mode tab. Check whether the version of Java displayed
for Java (Sun) is one of the versions specified above. If
Java (Sun) is not displayed, it means that Java is not
installed. You need to install Java.
To enable Java Plug-in
Check “Use JRE 1.6.0_01 for <applet> (requires
restart)” in “Java (Sun)”.
To install Java Plug-in
Download Java 2 Runtime Environment, Standard
Edition (JRE) from the homepage of Sun Microsystems,
Inc., and install it by following the instructions on the
installer.
Notes
• If Automatic configuration is enabled in the Local
Area Network (LAN) Settings of Internet Explorer,
the camera image may not be displayed. In that case,
disable Automatic configuration and set the Proxy
server manually. For the setting of the Proxy server,
consult your network administrator.
• When you install ActiveX Control, you should be
logged in to the computer as the Administrator.
Tip
Every page of this software is optimized for display
character size Medium for Internet Explorer.