Sony IPELA SNC-P1 - Manual (Page 50)

A
d
mini
s
tra
ting
t
he
Came
ra
Recording Images in Memory — Image memory setting Menu
50
OK/Cancel
See “Buttons common to every setting menu” on page
29.
Alarm recording Tab — Setting the
Image Memory Function when
Detecting the Alarm
You can set to record the image and audio file to the
built-in memory linked with the external sensor input or
with the built-in motion detection function.
Alarm recording
Select On to set to record the image and audio file to the
built-in memory linked with the external sensor input or
with the built-in motion detection function.
Image file name
Type the file name you want to assign to the images
when saving in the built-in memory. You can use up to
10 alphanumeric characters, - (hyphen) and _
(underscore) for naming.
Suffix
Select a suffix to add to the file name.
Date & time: The Date & time suffix is added to the
Image file name.
The Date & time suffix consists of lower two-digits
of year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits), second (2 digits)
and consecutive number (2 digits), thus 14-digit
number is added to the file name.
Sequence number: A consecutive number of 10 digits
between 0000000001 and 4294967295 and an
consecutive 2 digits number is added to the Image
file name.
Tip
A consecutive number added to Date & time and
Sequence number is used to identify each of multiple
files created with one alarm event.
Sequence number clear
Click Clear to reset the Sequence number suffix to 1.
Alarm
Select the connected alarm.
Sensor input: The external sensor which is connected to
the sensor input of the camera I/O port.
Motion detection: Click Motion detection button, and
the Motion detection setting page is displayed. You
can set the motion detection function (page 53).
Note
Motion detection works only when the Video mode is
set to MPEG4 and the Cropping is set to Off.
Effective period
Set the period when the alarm detection is effective.
Always: The alarm detection is always effective.
Schedule: You can specify the period when the alarm
detection is effective in the schedule setting in the
other section.
Click Schedule and the setting menu for the effective
period is displayed. (“Setting the Schedule —
Schedule setting Menu” on page 55)
Alarm buffer
Select Use alarm buffer when you forward the image/
audio of before and after the alarm detection (pre-alarm,
post-alarm).
If you do not select it, only the image of the moment of
the alarm detection is forwarded.
Click Alarm buffer to display the Alarm buffer setting
menu.
For details, see “Setting the Alarm Buffer — Alarm
buffer setting Menu” on page 56.
OK/Cancel
See “Buttons common to every setting menu” on page
29.