Advanced hotsync, Operations – Sony PEG-N710C User Manual

Page 129

Advertising
background image

129

Chapter3

Exchanging and updating data using a HotSync

®

operation

5

Adjust the following options as needed.

Serial Port: Identifies the port for the modem. If you are unsure of

the port assignment, look at the Modem Properties in the Windows
Control Panel.

Speed: Determines the speed at which data is transferred. Try the

“As Fast As Possible” rate first, and then adjust downward if you
experience problems. This setting allows the Palm Desktop for CLIE
software and your CLIE handheld to find and use the fastest speed.

Modem: Identifies the modem type or manufacturer. Refer to your

modem manual or face plate for its type or settings. If you’re not
sure of your modem type or your modem doesn’t match any that
appear in the list, select Hayes Basic.

Setup String: Identifies the setup string for your particular modem.

Not all modems require a setup string. Refer to your modem
manual and enter a setup string if recommended by the
manufacturer.

6

Click OK.

Preparing your CLIE handheld

Follow the procedures below to prepare your CLIE handheld for a modem
HotSync operation.

1

Rotate the Jog Dial navigator to select HotSync and then
press the Jog Dial navigator. Or tap the HotSync

icon on

the Application Launcher screen.

The HotSync dialog box appears.

2

Tap Modem.

Advanced HotSync

®

operations

Continued on next page

Advertising