Sony PEG-N710C - Manual (Page 205)

205 Chapter6 Additional information
9
Click OK and then remove your CLIE handheld from the cradle.
10
Perform a soft reset of your CLIE handheld.
11
Restart your computer.
12
Place your CLIE handheld on the cradle and then press the
HotSync button.
Checking for an unnecessary device driver in the Device
Manager tab
1
Right-click the My Computer icon and then click Properties
from the shortcut menu.
The System Properties window is displayed.
2
• When using Windows 2000 Professional, click the Hardware
tab and then click the Device Manager button.
• When using Windows 98/98SE/Me, click the Device Manager
tab.
3
Check to see if there is a device with the “!” or “X” mark in
the list.
A device with one of the marks will not operate properly and may affect
the USB Switcher operation. Remove the device or contact the supplier of
the driver about upgrading the driver.
Troubleshooting – Frequently Asked Questions
Continued on next page