Sonic Blue Rio EX1000 - Manual (Page 11)

10
Your system is equipped with a clock, which allows you to turn your
system on and off automatically.
You should set the clock:
When you first purchase the Executive Shelf System
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start over.
Switch the system on by pressing On/Standby ( ) on the
remote.
Press Timer/Clock twice to display CLOCK.
Press Program/Set to display the flashing hour.
To... Press...
Increase the hours
Decrease the hours
When the correct hour is displayed, press Program/Set.
Result: The minutes will then flash.
To... Press...
Increase the minutes
Decrease the minutes
When the correct time is displayed, press Program/Set.
Result: The clock starts and is displayed.
You can display the time, even when you are using another func-
tion, by pressing Timer/Clock once.
You can use the Multi Jog dial instead of the / buttons in
Steps 4,6.
Setting the Clock
1
2
3
4
5
6
7
You can view the various functions available on your system.
Press the Demo button.
Result: The various functions available are listed in turn on the
display.
All these functions are described in detail in this guide.
For instructions on how to use them, refer to the appropriate sec-
tions.
To cancel this function, press Demo again. 2
1
Viewing the Various Functions on Your
System
4,6
1
3,5,7
4,6
2