Sonic Blue Rio EX1000 - Manual (Page 15)

14
You can check or change your selection of programmed tracks at any
time.
Press once if you have started listening to the selection.
Press Program/Set.
Result: The following is displayed:
(01 = Program no., – – = Track no. on the disc)
If you have already programmed 24 tracks, Check is displayed
instead of PR when you press Program/Set.
Press Program/Set one or more times until the track to be changed
is displayed.
Press / or turn Multi Jog to select a different track.
Press Program/Set to confirm your change.
Press CD ( ) to start listening to the selection.
Result: The first track selected is played.
1
2
3
4
5
6
You can decide:
the play order of the tracks
to skip certain tracks
The play order of up to 24 may be programmed.
If the CD function is selected, stop the player by pressing .
Load the selected CD.
Press Program/Set.
Result: The following indications are displayed:
(01 = Program no., – – = Track no. on the disc)
Select the required track by pressing:
to move back through the tracks
to move forward through the tracks
Press Program/Set to confirm your selection.
Result: The selection is stored and is displayed.
To select other tracks, repeat Steps 3-5.
Press CD ( ) to listen to the tracks in the order programmed.
To... Press...
Listen to the current track again once
Listen to the previous track twice
Listen to the next track once
Skip forwards or backwards or the appropriate
number of times
To cancel the selection, press .
Press once if the compact disc player is stopped.
Result: PRGM is no longer displayed.
If you open the disc compartment, the selection is cancelled.
8
9
7
Programming the Order of Playback
1
2
3
4
5
6
1, 9
7
4,8 4,8
3,5
Checking or Changing Programmed
Tracks
6
2,3,5
1
4 4
1
4
4
4
*This function does not operate while using an MP3-CD.