Sonic Blue Rio EX1000 - Manual (Page 9)

8
The auxiliary input can be used to take advantage of the sound quality
of your Executive Shelf System when listening to other sources.
Examples: A television
A video disc player
A Hi-Fi stereo video cassette recorder
To connect the external source, the source must have an audio out-
put. In addition, you need an RCA connection cable.
Set the system to standby mode and disconnect it and the external
source from the electrical outlet.
Connect the audio cable to the rear of the
Executive Shelf System.
Connect the... To the connector marked...
Red jack R (right)
White jack L (left)
For optimum sound quality, do not invert the right and left
channels.
Plug the system back into the electrical outlet and press ( ) to
switch it on.
Select the AUX source by pressing AUX.
Result: AUX is displayed.
Switch the external source on.
Adjust the volume and balance as required:
Volume Equalizer S.Bass
Example: You can watch a film and take advantage of stereo sound,
provided that the original soundtrack is in stereo.
Connecting to an External Source
1
2
3
4
5
6
The System has Main Speaker jacks and Subwoofer Speaker jacks.
Main Speaker Connection: Connect the Main Speaker cords (red/black)
to the Main Speaker jacks of the System
Subwoofer Speaker Connection: Connect the Subwoofer Speaker cords
(blue/black) to the Subwoofer Speaker
jacks of the System
Connecting the Speakers
For Best Results when Installing Speakers
Installation near heat sources, in direct sunlight, or in an environ-
ment with high humidity may cause performance degradation of
the speaker.
Do not install speakers on a wall or in any unstable place to pre-
vent the speakers from potentially falling.
Placing speakers near the TV or computer monitor may influence
the quality of the screen display.
(Right Speaker) (Left Speaker)