Tape counter, Selecting the cassette playback mode – Sonic Blue Rio EX1000 User Manual

Page 17

Advertising
background image

16

Always treat your cassettes with care; refer, if necessary, to the
section entitled “Precautions When Using Audio Cassettes” on
page 22.

Switch the system on by pressing On/Standby ( ).

Open the cassette deck by pushing on the corner of the cover
marked Push Eject (

) until you hear a click.

Insert the pre-recorded cassette with the open edge of the tape
facing downwards.

Close the deck by pushing on the cover until it clicks into place.

To listen to...

Press ...

Side A
Side B

Press the

or

buttons if necessary.

To...

Press ...

Rewind the cassette

Fast-forward the cassette

When you have finished playback, press the

button.

Listening to a Cassette

1
2

3

4

5

6

5

6

1

5

5

Your Executive Shelf System has three cassette playback modes,
which enable you to listen to both sides of a cassette
automatically.
Press REV.Mode until the appropriate symbol is displayed.

When the display indicates...

The system plays back...

One side of the selected cassette and
then stops.

One side of the cassette, followed by
the other side of the cassette and then
stops.

Both sides of the cassette indefinitely until
you press stop.

When playing a cassette, a counter is displayed to enable you to note
locations on the tape.

The counter is only displayed when a cassette is being played.

Reset the counter by pressing Counter Reset.

Tape Counter

Selecting the Cassette
Playback Mode

Advertising