Sunbeam 3932 User Manual
Page 2
When using your iron, basic safety precautions should
always be followed, including the following:
BEAD ALL INSTRUCTIONS BEFORE USE.
Use iron only for its intended use.
To protect against risk of electric shock, do not
immerse the iron in water or other liquids.
The iron should always be turned to “OFF” before
plugging or unplugging from outlet. Never yank cord
to disconnect from outlet; instead, grasp plug and pull
to disconnect.
Do
not allow cord to touch hot surfaces. Let iron cool
completely before putting away. Loop cord loosely
around iron when storing.
Always disconnect iron from electrical outlet when
filling with water or emptying and when not in use.
Do
not operate iron with a damaged cord or if the iron
has been dropped or damaged. To avoid the risk of
electric shock, do not disassemble the iron. Take it to an
authorized service center for examination and/or repair.
Incorrect reassembly can cause a risk of electric shock
when the iron is used.
Close supervision is necessary for any appliance being
used by or near children.
Do not
leave iron unattended
while connected or on an ironing board.
Burns can occur from touching hot metal parts, hot
water or steam. Use caution when you turn a steam
iron upside down
there may be hot water in the
reservoir.
If the iron is not operating normally, disconnect
from the power supply and have the iron serviced
by an authorized service center.