Sunbeam 3932 - Manual (Page 5)

V
OLTAGE
.
Be sure the dual voltage selector is in
the correct position before operating.
In North America the voltage selector switch
should be placed in the 120 volt position.
This appliance was set at the factory to
operate at 120 volts (See Figure 1).
. .
. .
HANDLE
To unlock the handle, press the handle
F
IGURE
release bar (See
Figure 2). The handle
will automatically rise to the upright
position and lock into place.
W
ATER
F
ILL
I
MPORTANT
: Always turn the fabric
select dial to OFF and disconnect
iron from electrical outlet before
filling or emptying the water tank.
F
IGURE
2
Slide the water tank release button backwards (See Figure 3)
and hold into position with one hand. Lift water tank to
remove from iron with the other hand (See Figure 4).
F IGURE
3