Starting the sonos setup assistant, Starting the sonos setup assistant -2 – Sonos Digital Music System User Manual
Page 46
Sonos Digital Music System User Guide
4-2
Starting the Sonos Setup Assistant
1.
Start the Sonos Desktop Controller software.
2.
When instructed, press and release the Mute and Volume Up buttons
simultaneously on the ZonePlayer you are connecting. (Remember, the first
ZonePlayer you install must connect to your home network using a standard
Ethernet cable).
You may release the buttons as soon as the Mute indicator (green) and the ZonePlayer
Status indicator (white) start to blink alternately. This takes approximately one second.
3.
Choose a ZonePlayer name from the pop-up menu, and then click Continue.
ZonePlayer
status
indicator
Mute button
Volume up (+)
Once the ZonePlayer is successfully added to your music
system, the ZonePlayer Status indicator will stop flashing
and change to solid white (normal operation), and the Mute
indicator will go off.
ZonePlayer added successfully