Sonos Digital Music System - Manual (Page 86)

Sonos Digital Music System User Guide 5-22
Advanced settings. The Advanced Settings menu provides you with 3 additional
menu choices:
• Deep sleep timer. Your Controller will go into deep sleep to preserve the battery
life when it is unused for the amount of time specified here. When your Control-
ler wakes from deep sleep - either from the motion sensor or from a button
touch - it will go through a restart cycle which takes several seconds.
• Turn off Controller. Use this setting to put your Controller into deep sleep imme-
diately any time it will not be in use for an extended period of time, or when you
are transporting your Controller to another destination. The Controller cannot
be turned off while it is connected to a power supply.
• Factory reset. Use this setting to return the Controller to its original factory set-
tings. This will disconnect the Controller from your Sonos Digital Music System
entirely (you can add it again at any time.) This may be necessary if the Controller
gets associated to the wrong music system during setup, or if you wish to join
your Controller to another Sonos Digital Music System.
Connecting a Line-In Music Source
You can play music from an external line-in music source such as a CD player or
portable music player that is connected to your Sonos Digital Music System. This audio
can be streamed to any ZonePlayer(s) in your house.
Note: You can listen to music from an external device in any zone, and use the
Sonos Digital Music System to control the volume settings. However, you must
control the playback (forward, pause, etc.) from the line-in source. If you have
Compressed encoding selected, you will notice a slight delay before the music
starts to play.