Sonos Digital Music System - Manual (Page 87)

Chapter 5: Using Your Sonos Controller 5-23
To connect a line-in music source
1. Use a standard RCA cable to connect the outputs from the external source to the
Audio in connections on the back of your ZonePlayer.The source device will
automatically be detected.
2. From the Music menu, select Line-In Sources and touch OK.
• To play music from this source, highlight it and touch OK.
• To change the name of the component, highlight it and select Edit Name.
Choose a new name from the list, and touch OK.
• To change the line-in level for this component, highlight it and select Edit Line
Level. Choose the line-in level appropriate for this device, and click OK.
The default (typical) line-in level for your device type automatically displays.
You can increase or decrease the level, but if the level is set too high, you may
experience clipping at higher volume levels.
Getting Software Updates
Sonos periodically provides you with software updates to improve performance or to
add new features. Your music system must be registered in order to receive updates.
There are two preference options available:
• Do not automatically check for updates. From the Music menu, you should pe-
riodically select System Settings
→
Online Updates to check for software up-
dates.
• Send a message when an update is available. (To change your preference set-
ting, see "Auto check for software updates" on page 5-25.) The message, "Up-
Analog audio in