Solid State Logic Soundscape Mixer - Manual (Page 31)

Soundscape Mixpander
Page 31 of 109
For stereo in ‐ mono out, only the left side of the stereo input will be connected to the mixer
column’s output. This configuration can be used to insert a 2 in/1 out mixer element such as a
mono compressor with side-chain input. The main signal will reach the compressor via input 1, the
key signal will reach the compressor via input 2. Only the main signal will reach the compressor’s
single output.
A typical stereo in - mono out mixer
column, as seen within the Mixer.
The same mixer column, presented
as a connection diagram.
1 2
A A
1
1 2
1
A