Solid State Logic Soundscape Mixer - Manual (Page 79)

Soundscape Mixpander
Page 79 of 109
If the Mixer you are opening has one or more columns which refer to units that are not available
(e.g., cards that you have removed from the computer), the following dialog box will be displayed:
Select “Skip this column” if you want to load the Mixer without these columns. Upon clicking
“OK” the Mixer will be loaded and a confirmation message will be displayed:
Alternatively you can select “Mute the entire column and map it to following unit:” and choose
another card using the drop-down list. Upon clicking “OK” the Mixer will be loaded and a
confirmation message will be displayed:
NOTE: The Mute tool can be used to unmute the muted mixer columns. This may cause mixer
elements to become muted in other mixer columns.