Solid State Logic Soundscape Mixer - Manual (Page 86)

Soundscape Mixpander
Page 86 of 109
Error status
The “Clear Error Status”, “Watch for Errors” and “Keep Error Status until Clear” items of the View
menu are also available in a pop-up menu that can be called up by right-clicking the Status Bar.
Double-clicking the Status Bar is equivalent to clicking “Clear Error Status”.
Clear Error Status
Error codes may be displayed in the Status Bar: PO for processing overruns, SU for streaming
underruns, INACT for inactive. By default, an error code displayed during normal operation will
disappear after a few seconds, but if the “Keep Error Status until clear” option (described below) is
active it will be displayed until “Clear Error Status” is clicked.
NOTE: Error codes resulting from a mixer building error, i.e. generated when the mixer
configuration itself exceeds the capabilities of the available DSP, cannot be effectively cleared until
the Mixer is modified. They will recur until the situation is resolved (e.g., by deleting a mixer
element).
Watch for Errors
If this option is active (ticked), any errors are monitored and the corresponding codes are
displayed in the Status Bar.
Keep Error Status until Clear
If this option is active (ticked), any error codes shown in the Status Bar are displayed until “Clear
Error Status” is clicked. Otherwise the error codes disappear automatically after a few seconds
(except for the “INACT” message when the Mixer configuration itself needs to be changed).
Always on top
If “Always on top” is selected (ticked), the SSL Soundscape Mixer window will always be shown
on top of any other window, even if that other window is active and except if that other window is
also set to be “always on top”.