Samsung SADT-100HM - Manual (Page 3)

2_SADT-100HM
4. Remove the Connectors at the end of the Camera Adaptor.
In the next step, peel off the coating of the cable and connect it to the external cable using soldering.
(See the wiring diagram of the installation guide for the Camera to connect the cables.)
Repeat the above steps to connect all of the 4 Connectors to the appropriate external cables.
CAMERA ADAPTOR CAMERA ADAPTOR
CABLE
CONNECTOR
EXTERNAL CABLE
SOLDERING
BNC JACK
CONNECTOR
CONNECTOR
BNC JACK
EXTERNAL CABLE
SADT-100HM_ENG.indd 2 2008-01-23 오후 4:35:31