Samsung SADT-100HM - Manual (Page 5)

4_SADT-100HM
7. Insert the connected cables through the Hanging Mount Adaptor into the Piple. Secure the Camera
Adaptor to the Hanging Mount Adaptor in such way that you fit the 4 Screws (attached to the Hanging
Mount Adaptort) into the 4 corresponding holes of the Camera Adaptor before fixing them.
Ensure that place the Camera Adaptor behind the camera so that Template A of the Camera Adaptor can
be hidden. Furthermore, pay special attention so that the insulated coating of the cable should be kept
intact while the insertion.
8. Prepare the Camera Body for installation.
Put up the Safet y Wire, attached to the camera, on the Safety Hook.
CAUTION
To avoid accidental fall and consequent damage to the camera during installation or detachment,
make sure the Safety Wire is secured to the hook.
"A"
HANGING
MOUNT
ADAPTOR
CAMERA ADAPTOR
Insert the cables
into the Pipe
HANGING MOUNT
ADAPTOR
SCREW
Screw-fixing Hole
CAMERA ADAPTOR
HANGING MOUNT
ADAPTOR
SAFETY HANGER
CAMERA
CAMERA ADAPTOR
SAFETY WIRE
CAMERA ADAPTOR
SAFETY HANGER
HANGING MOUNT
ADAPTOR
SAFETY WIRE
CAMERA
SADT-100HM_ENG.indd 4 2008-01-23 오후 4:35:35