Samsung SADT-100HM - Manual (Page 7)

6_SADT-100HM
0. Use the screws, attached to the Camera, to firmly fix the Camera with the Camera Adaptor.
Once you have removed the camera from the Camera Adaptor, loosen the screw, turn the camera counter
clockwise by about 10 degrees, and then pull it down.
CAUTION
If you are not tightening up the screw, the Camera can be loose from the Camera Adaptor, causing
safety accidents or damage to the Camera. So make sure you tighten up the Screws.
Product Specification
Location for use: Indoors
Installation Spot: Vertical Structure:
Dimension: See the figure
Weight: 259g
Material: aluminium
Operation Temperature: -10˚C ~ 50˚C
HANGING MOUNT
ADAPTOR
CAMERA
SCREW
Œ

Ø117
SADT-100HM_ENG.indd 6 2008-01-23 오후 4:35:37