Sony STR-DA3100ES - Manual (Page 70)

masterpage:Left
lename[E:\SEM_Janet\DATA_DA3100ES\J9041615_2514877111STRDA3100ESU\251487711
\GB09REM_STR-DA3100ES-U.fm]
70 US
model name1[STR-DA3100ES]
[2-514-877-11(1)]
When using a Sony receiver as an amplifier in
the 2nd (or 3rd) zone and it is connected to the
main receiver using an IR repeater (not
supplied) as shown below, the following
operations are possible.
• Switching the output source for the 2ND (or
3RD) ZONE OUT jacks.
• Switching the Sony receiver’s power on or off
in the 2nd (or 3rd) zone.
• Adjusting the volume of the Sony receiver in
the 2nd (or 3rd) zone.
Perform the following operation to set the
command mode of the remote to 2ND ZONE or
3RD ZONE.
Press 2ND ZONE or 3RD ZONE.
The command mode has been set to the 2nd or
3rd zone mode.
Example of controlling the amplifier in the
2nd room
* You can connect the speakers directly to SPEAKERS SURR BACK (3RD ZONE) terminals.
2nd (3rd) zone operations
To Do the following
Turn the power on or off Press ?/1.
Listen to the sound of the
SA-CD/CD player connected
to the SA-CD/CD input jacks Press SA-CD/CD,
then press N.
Adjust the volume Press MASTER
VOLUME +/–.
2ND
(3RD)
ZONE
OUT
RM-US106A
+
–
M m
+ –
> .
x X
N n
STR-DA3100ES
Audio/video components
Main receiver 2nd (or 3rd) zone
IR repeater
(not supplied)
IR repeater
(not supplied)
Monitor
(2nd zone only)
Speaker Speaker
Amplifier*
GB01COV_STR-DA3100ES-U.book Page 70 Wednesday, January 19, 2005 5:30 PM