Remote control learning caveats – Symphonic ZEKTOR MAS3 User Manual
Page 10
10
S
TEP
11
11 After a pause, the Power indicator blinks 7 times, and repeats.
Press the key on your remote that you want to use as the new key
for P
OWER
OFF
.
7
BLINKS
S
TEP
12
12 The MAS3 will return to the standby mode indicating a return to
normal operations. The newly programmed codes will now operate
your MAS3.
Remote Control Learning Caveats
Some component’s control codes will work better than others. We’ve designed the MAS3 to work
with a great majority of codes, however a few brands use non-standard ways of transmitting their
component’s codes that may not be compatible with the MAS3. In these somewhat rare circum-
stances you will have to program your remote control to a different manufacturer’s code, and/or use
different buttons on your remote.
When programming the MAS3, if the IR indicator light blinks, and the MAS3 moves on to the next
step, then the remote controller’s key code has been accepted. If the IR indicator does not blink, it
indicates the MAS3 does not understand that particular manufactures code and you will have to
choose another.
In some cases the remote key code will be accepted, however the range will be limited. If the range
of a programmed key is unacceptable, you will have to choose a different manufacturer and try
again.
3
2
1
ZEKTOR
3
2
1
ZEKTOR