Symphonic ZEKTOR MAS3 - Manual (Page 5)

5
Programming your Remote Control
Setting up your Universal Remote Control
For remote control operations, the MAS3 requires either a Universal Remote control to be pro-
grammed as one of eight pre-programmed devices, or alternatively, the MAS3 can be taught to use
most existing remote controls.
The simplest way begin using the MAS3, is to program your Universal Remote control to act like a
Symphonic TV. Once this is done you will be able to immediately start using your MAS3.
Check your remote’s user manual for instructions on programming your remote control.
The following table shows the Symphonic TV codes for a few different brands of Universal Remote
Controllers:
Make Device Code
Sony TV 023
One For All TV 0476
Sanyo TV 303
GE / RCA TV 046
X10 TV 062
Zenith / Phillips /
Magnavox
TV 552