Symphonic ZEKTOR MAS3 - Manual (Page 11)

11
Bright / Dim / Auto-dimming Modes
Setting the Display intensity modes of the MAS3
The front panel display of the MAS3 can be set to Bright, Dim or an Auto-dimming mode where the
display brightens for 4 seconds after any function is selected and then auto-dims.
Setting the mode is simply a matter of toggling between the three modes:
• Bright Mode. When pressing the S
ET D IM M ODE
key to toggle to this state, the display will turn
bright and remain that way.
• Dim Mode. When pressing the S
ET D IM M ODE
key to toggle to the Dim mode, the display will go
dim and remain that way.
• Auto-dimming Mode. When pressing the S
ET D IM M ODE
key to toggle to the Auto-dimming
mode, the display will turn bright, then flash to dim, then flash back to bright, indicating the
Auto-dimming mode has been selected. After 4 seconds of no activity, the display will smoothly
dim to the dim setting.