38 drivers installation guide windows 95, Novell 3.x&4.x, Sco unix – SOYO 6KB82440 User Manual
Page 42
38
Drivers Installation Guide
WINDOWS 95
1)
Close any running applications.
2)
Insert the floppy disk into drive A:.
3)
Open ÒMy ComputerÓ, double click ÒDrive A:Ó.
4)
Double click ÒWin95Ó.
5)
Double click the Setup program.
6)
Then just follow the instruction.
NOVELL 3.X&4.X
1)
Copy the driver TRIN4X.DSK or TRIN312.DSK to the subdirectory
which holds the file SERVER.EXE.
2)
Boot up the file server.
3)
On the system console and on the command prompt state, type in:
load TRIN4X.DSK <Enter> or load TRIN312.DSK <Enter>
You can also include the above command line into the start up file
STARTUP.NCF to load the driver automatically.
SCO UNIX
1)
Install SCO UNIX 3.2.x or SCO Open Desktop 3.x using the default
SCO IDE driver.
2)
Reboot your SCO UNIX system
3)
Insert Triones supplied diskette into the 3.5 inch floppy drive of
your system. Use doscp command to copy the file TRISCO.TAR to
your /tmp directory. for example, if you are using floppy drive A,
type: doscp a:/scounix/trisco.tar/tmp/trisco.tar