SoundCraft UREI 1601E - Manual (Page 39)

39
Additional speed settings for FILTER/FLANGER/PANNER
For example:
FILTER: In single mode, press & hold the FILTER effect button and then rotate the FX SPEED rotary switch to one of its 5 positions
to access 1 bar, 2 bar, 4 bar, 8 bar & 16 bar settings.
Default settings ‘4 bars’ for FILTER and FLANGER, 2 bars for PANNER.
MULTI MODE
Multi mode consists of 25 factory preset programs where combinations of the five effects have been carefully setup to offer maximum
multi-effects power. The ability to modify the presets in real-time gives added flexibility and allows the user to create customised
variations.
The [BANK] rotary switch is used to recall the factory presets from B to F.
See the PRE-SET VOICE LIST for specific preset program parameters.
NOTE: Edited presets are memorised between multi preset selections whilst power remains ON.
PROGRAM EDIT AND RECALL.
Any alterations to the ISOLATOR and X/Y edit parameters will be memorised. When changing between programs the user can set
up a program to their own requirement, change to another program(s) and then return to a previous program and have their special
set-up recalled.
To reset the factory settings at any time:
Press & hold the current program button and then press TAP/CLEAR to instantly re-load the default set-up.