Charging the battery pack 1 – Sharp VL-NZ150U User Manual

Page 25

Advertising
background image

Preparation

10

Charging the Battery
Pack

1

Attach the battery pack on the
camcorder, and make sure that the
Power switch is set to OFF.

2

Plug the AC adapter into a power outlet
(1), then insert the DC plug into the DC
input jack (2).

• The charge indicator lights up.

• The charge indicator turns off when the

battery is charged.

3

Remove the DC plug from the DC input
jack, then remove the AC adapter from
the power outlet.

Notes:
Charge the battery pack between 50°F and

86°F (10°C and 30°C). The battery pack may
not charge properly at temperatures too low
or too high.

The battery pack and charger become warm

during charging. This is not a malfunction.

Using the zoom (see page 21) and other

functions or turning the power on and off
frequently will increase power consumption.
This may result in a decrease in the actual
recording time compared to the maximum
continuous recording time listed above.

The charging time and recording time may

vary depending on the ambient temperature
and the condition of the battery pack.

• See page 75 for more information on using the

battery pack.

Caution:
• Charge only SHARP model BT-L225 or BT-L445

battery packs. Other types of battery packs may
burst, causing personal injury and damage.

Extending battery pack life

Even when the battery pack is not used, the
capacity of the battery pack will naturally
deteriorate over time. To limit the deterioration
of the capacity, it is recommended to perform
the following procedure at least once every six
months:

1Fully charge the battery pack.

2Attach the battery pack to the camcorder,

and set the Power switch to CAMERA
without inserting a cassette. Allow the
battery power to fully discharge by leaving
it on the camcorder until the camcorder
power automatically turns off.

3Remove the battery pack and store it

between 50°F and 68°F (10°C and 20°C).

BT-L225

Charging

time

Battery

pack

Max. continuous

recording time

Max. continuous

playback time

BT-L445

approx.

2hr.

approx.

3hr. 30min.

approx.

1hr. 30min.

approx.

1hr. 30min.

approx.

3hr.

approx.

3hr.

Charging time and maximum continu-
ous recording and playback times in
TAPE modes

Advertising
This manual is related to the following products: