Sharp VL-NZ150U - Manual (Page 48)

33
Useful Features
Useful Features
Camera Recording
Still Recording on Tape
Available mode:
TAPE-CAMERA
You can record continuous still images of
subjects.
1
Set the camcorder to TAPE-CAMERA
mode.
2
In Recording Standby mode,
press the STILL button fully.
• A still image of the subject is
displayed.
3
Press the REC START/
STOP button.
• The still image of the
subject will be recorded.
To pause recording
Press the REC START/STOP button.
To cancel the still image
Press the STILL button fully.
Notes:
• Still Recording can also be used during
recording by pressing the STILL button fully.
• The picture quality in Still Recording function will
be slightly lower than normal pictures.