Sharp VL-NZ150U - Manual (Page 31)

Preparation
16
Setting the Date and
Time
Available modes:
TAPE-CAMERA, CARD-CAMERA
Example: Setting the date to June 2, 2003
(JUN. 2. 2003) and the time to 10:30 am
(10:30 AM).
Note:
• Before performing the steps below, make sure
that the lithium battery has been installed (see
page 14).
1
Hold down the Lock button
and set the Power switch to
CAMERA.
2
Press the MENU button until the menu
screen appears.
3
Press the SET button.
4
Press l or m to select “JUN” (month),
then press the SET button.
5
Press l or m to select “2” (day), then
press the SET button.
6
Press l or m to select “2003” (year),
then press the SET button.
7
Press l or m to select “10 AM” (hour),
then press the SET button.
8
Press l or m to select “30” (minute),
then press the SET button.
• The internal clock now starts operating.
9
Press the MENU button to turn off the
menu screen.
Note:
• If the date and time have been set, the SETTING
1 screen (T) appears in step 2. Select
“SETTING” in the CLOCK SET screen (P) using
the Operation button and SET button.
JUN.
1 2 0 0 AM :
1 2 0 0 2 . SE T T I NG
JUN.
1 2 0 0 AM :
2 2 0 0 2 . SE T T I NG
JUN.
1 2 0 0 AM :
2 2 0 0 3 . SE T T I NG
JUN.
1 0 0 0 AM :
2 2 0 0 3 . SE T T I NG
JUN.
1 0 3 0 AM :
2 2 0 0 3 . SE T T I NG
C L O C K S E T
D I S P L A Y
S E T T I N G
1 2 H 2 4 H /
R E T U R N
J A N . 1 2 0
1 2 0 0 AM :
0 2 .
Lock button
Operation button
SET button
Power switch
MENU button