Sharp VL-NZ150U - Manual (Page 9)

viii
Card Recording
1
Insert a card into the camcorder.
2
Set the Media Selection
switch to CARD.
3
Hold down the Lock button and set the
Power switch to CAMERA.
• The picture from the lens now displays.
4
Adjust the Power Zoom control to frame
the subject as you desire.
5
Press the STILL button half-way down to
focus on the subject.
• The camcorder automatically focuses on
the subject. When it is set, you will hear
a sound and see T mark, then the
camcorder locks the focus.
6
Press the STILL button fully to begin
recording.
• The S indicator flashes red while data
is being recorded on the card, and
returns to white when recording
completes.
A U T O
NORMAL
CARD
/ 9 8 1
7
0 1
8 9
0 1 0 0 - 0 0
2 / 2 P A G E
1
N O RMA L
P L A Y B A C K
1
4
2
5
3
6
1 0 0 0 - 0 0
2 / 1 P A G E
1
N O RMA L
P L A Y B A C K
A U T O
NORMAL
/ 9 8 1
CARD
NORMAL
/ 9 8 1
CARD
3 0 0 0 - 0 0 1
N O RMA L
0 1 / 3
1 0 0 0 - 0 0 1
N O RMA L
0 1 / 1
CARD
Card Playback
1
Set the Media Selection
switch to CARD.
2
Hold down the Lock button and set the
Power switch to VCR.
• The images recorded on the card are
displayed in a thumbnail format.
3
Press j, k, l or m on the Operation
button to move the selection frame to
the desired image.
4
Press the SET button.
• The selected image displays in full-
screen.
Number of shots taken/remaining
Lock button
Lock button
Page number/total thumbnail pages
Image file name