Siemens Gigaset C450 IP - Manual (Page 11)

10
First steps
Gigaset C450 IP / Greek eng / A31008-M1713-T151-2-8U19 / starting.fm / 19.9.06
Ve
rs
ion 4,
16
.09.
2005
Making settings for VoIP
telephony
Before you can use the Internet (VoIP) to
phone any other users on the Internet, the
fixed network or the mobile phone net-
work, you need the services of a VoIP pro-
vider who supports the VoIP SIP standard.
Precondition: You have registered with a
VoIP provider (e.g.via your PC) and set up
an account. The provider must support
the VoIP SIP standard.
The following phone settings are neces-
sary in order for you to use VoIP. You will
receive all information from your VoIP pro-
vider.
u Your user name with the VoIP provider,
if this is required by the VoIP provider
u Your registration name
u Your password with the VoIP provider
u VoIP provider general settings
The connection wizard will help you with
the settings.
Starting the connection wizard
Precondition: The base station is con-
nected to the mains power supply and a
router. Your router is connected to the
Internet.
Tip: If VoIP (
IP) is activated as the default
connection for your phone (default set-
ting see page 41), the phone will attempt
to make a direct connection to the server
belonging to your VoIP provider after the
connection assistant is closed. If incorrect/
incomplete information means that the
connection cannot be established, mes-
sages will be displayed (page 12).
If the handset battery is sufficiently
charged, the message key f on the hand-
set will flash (around 20 minutes after you
have put the handset in the charging cra-
dle).
¤
Press the message key f.
You will see the following display:
§Yes§ Press the display key to start
the connection assistant.
~ Enter the system PIN of the
base station (the default is
0000) and press §OK§ .
Note:
Your phone is preconfigured for dynamic
assignment of the IP address. In order for your
router to "recognise" the phone, dynamic IP
address assignment must also be activated on
the router, i.e. the router's DHCP server is acti-
vated. Turn to page 43 to find out how to
assign your phone a static IP address if neces-
sary.
Note:
The connection wizard will also start automat-
ically if you try to establish a connection via
the Internet, before you have made the neces-
sary settings.
You can also call up the connection wizard at
any time via the menu (page 42).
Start VoIP
Connection
Assistant?
§§§§No§§§§ §§§§§Yes§§§§