Siemens Gigaset C450 IP - Manual (Page 33)

32
SMS (text messages)
Gigaset C450 IP / Greek eng / A31008-M1713-T151-2-8U19 / sms_neutral.fm / 19.9.06
Ve
rs
ion 4,
16
.09.
2005
§Menu§
4 I O 2 L
~ Q
§OK§ Deactivate the SMS function.
Or:
~ 1
§OK§ Activate the SMS function
(default settings).
SMS troubleshooting
Error codes when sending
If an SMS cannot be sent for a longer
period of time, it is moved to the
incoming message list and given the
status Error XX.
Self-help with errors
The following table lists error situations
and possible causes and provides notes on
troubleshooting.
E0 Calling Line Identification permanently
withheld (CLIR) or Calling Line Identifica-
tion not activated.
FE Error occurred during SMS transfer.
FD Connection to SMS centre failed, see self-
help.
You cannot send messages.
1. You have not requested the CLIP service
(Calling Line Identification Presentation,
page 18).
¥
Ask your service provider to enable this
service.
2. SMS transmission has been interrupted
(e.g. by a call).
¥
Re-send the SMS.
3. Network provider does not support this fea-
ture.
4. No phone number or an invalid phone
number is entered for the SMS centre acti-
vated as the active send service centre.
¥
Enter phone number (page 31).
You receive an incomplete SMS.
1. Your phone's memory is full.
¥
Delete old SMS messages (page 30).
2. The service provider has not yet sent the
rest of the SMS.
The message is played back.
1. The "display call number" service is not acti-
vated.
¥
Ask your service provider to activate this
function (chargeable).
2. Mobile phone operator and network SMS
service provider have not agreed on a coop-
eration.
¥
Obtain information from your network
SMS service provider.
3. Your terminal is recorded by your SMS pro-
vider as having no fixed network SMS func-
tionality, i.e. you are no longer registered
with the provider.
¥
Register your terminal (again) for SMS
reception (page 28).
SMS messages are only received as voice mes-
sages during the day.
The terminal is recorded in your SMS pro-
vider's database as having no fixed network
SMS functionality, i.e. you are no longer
registered with the provider.
¥
Register your terminal (again) for SMS
reception (page 28).
You cannot access the SMS functions on your
handset.
Another handset that is registered at the
same base station is currently using the
SMS functions.
¥
Wait until there is no other handset
using the SMS functions.