Belt clip and headset, Attaching the belt clip, Connection socket for headset – Siemens Gigaset C450 IP User Manual
Page 14
13
First steps
Gigaset C450 IP / Greek eng / A31008-M1713-T151-2-8U19 / starting.fm / 19.9.06
Ve
rs
ion 4,
16
.09.
2005
Belt clip and headset
By using a belt clip and headset (optional)
you can easily make your handset a con-
stant companion both inside the building
and in its immediate vicinity.
Attaching the belt clip
There are notches for attaching the belt
clip on the side of the handset at approxi-
mately the same height as the display.
¤
Press the belt clip onto the back of the
handset so that the protrusions on the
belt clip engage with the notches.
The tongue of the belt clip must face the
battery compartment.
Connection socket for headset
You can use headsets with jack connec-
tors. The following models have been
tested and are therefore recommended:
HAMA Plantronics M40, MX100 and
MX150.
The transmission quality of other models
cannot be guaranteed.