Siemens Gigaset C450 IP - Manual (Page 35)

34
Using several handsets
Gigaset C450 IP / Greek eng / A31008-M1713-T151-2-8U19 / T-NetBox_SAG-registration.fm / 19.9.06
Ve
rs
ion 4,
16
.09.
2005
Using several handsets
Registering handsets
You can register up to six handsets to your
base station.
Registering another Gigaset C45
handset
Before you can use your handset, you
must register it to a base station.
You must initiate handset registration on
the handset and on the base station.
If the handset has been registered suc-
cessfully you will see the display key §INT§ at
the bottom left of the display. Otherwise
repeat the procedure.
On the handset
Menu§
¢
Settings
¢
Handset
¢
Register
Handset
~ Enter the system PIN of the
base station (the default is
0000) and press §OK§ . The dis-
play shows e.g. Registering and
Base is flashing.
On the base station
÷
Within 60 secs. press and hold
the registration/paging key on
the base station (page 1)
(min. 1 sec.).
The handset is assigned the lowest unas-
signed internal number (1–6). If several
handsets are registered to the base sta-
tion, the internal number is shown in the
display after registration, e.g. INT 2 . This
means that the handset has been assigned
the internal number 2.
Registering other handsets
You can register other Gigaset handsets
and handsets for other devices with GAP
functionality as follows.
On the handset
¤
Start to register the handset as
described in its user guide.
On the base station
÷ Press and hold the registra-
tion/paging key on the base
station (page 1) (min. 1 sec.).
De-registering handsets
You can de-register any registered C45
handset from any registered handset.
§INT§ Press the display key. All regis-
tered handsets are displayed.
q Select the handset to be de-
registered.
§Menu§ Press the display key.
Notes:
– If there are several handsets registered to
your base station, you can use one to make
a call via the fixed network and the other to
make a call via the Internet at the same
time.
– As a rule, all calls from a registered GAP
handset are dialled via the connection type
(fixed network or VoIP, see page 41) that
has been set up as Default Line Type .
If you want to establish a connection via
the other connection type, enter a "*" (star)
after the phone number. Example:
0498912345671234567*.
Notes:
If six handsets are already registered to the
base station, there are two options:
– The handset with the internal number 6 is
in idle status: the handset you wish to reg-
ister is assigned the number 6. The handset
that was previously number 6 is de-regis-
tered.
– The handset with the internal number 6 is
being used: the handset you wish to regis-
ter cannot be registered.