Sprint Nextel SP7084 - Manual (Page 32)

32 TAD Operation
SELECTING THE NUMBER
OF RINGS
You can select how long the TAD waits to
answer a call. If you plan to check your mes-
sages by long distance, you can choose the
toll-saver setting. The TAD answers on the
first two rings if you have a new message. If
there are no new messages, the TAD an-
swers after four rings. This gives you time to
hang up before the TAD answers so you can
avoid unnecessary long-distance charges.
To select the number of rings, follow these
steps.
1. Press PROGRAM .
2. Select ANSW .
3. Repeatedly select NEXT until RING
SELECT appears.
4. Use the keypad to enter your ring selec-
tion ( 2 – 9 or 0 for toll saver).
5. Select SAVE .
6. Press PROGRAM to exit.
CALL SCREENING
You can also let the TAD answer calls for
you while you listen to the caller's message
through the speaker. If you decide to answer
the call, press the corresponding line button.
You cannot hear the incoming message un-
less Call Screening is turned on. Call Screen
is preset to
OFF .
1. To turn Call Screen on, repeatedly press
SCREEN until SCREEN/DO NOT DIS-
TURB lights.
2. To turn Call Screen off, repeatedly press
SCREEN until SCREEN OFF appears
and SCREEN/DO NOT DISTURB goes
off.
Note: Voice mail must be on for Call Screen
to operate. To turn voice mail on, press
VOICE MAIL until VOICE MAIL lights.
SETTING THE TAD TO
ANSWER CALLS
To set the TAD to answer calls, you must set
the Auto Attendant on.
VOICE MAIL automati-
cally turns on and VOICE MAIL lights when
you set the Auto Attendant on (see “Auto At-
tendant Operation” on Page 28).
You can also direct the call to another station
within the system. If you want the call to be
answered by the station's TAD that receives
the directed call,
VOICE MAIL must be on at
each station. Voice mail is preset to OFF .
To turn voice mail on, press VOICE MAIL .
VOICE MAIL lights and the display shows
the number of new and total messages re-
ceived.
Note: GREETING TIMER appears when
you press VOICE MAIL while the greeting tim-
er is on (see “Setting the Greeting Timer”).
To turn voice mail off, press VOICE MAIL
again. VOICE MAIL turns off.
Setting the Greeting Timer
You can set the system to answer with
Greeting 1 during a specified period, and an-
swer with Greeting 2 or not answer for the re-
mainder of the time. The timer is preset to
OFF .
1. Press PROGRAM .
2. Select ANSW .
3. Select NEXT twice until GREETING
SETUP appears.
4. Select ENTER .
43-5708.fm Page 32 Monday, September 18, 2000 7:56 AM