SpectraLink NetLink e340 - Manual (Page 28)

SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone
Cisco CallManager and IP Phone 7960 Emulation
72-1082-02-F.doc Page 28
Auxiliary Ring 1 and Ring 2 Auxiliary rings are designed to be utilized by OAI
applications, enabling the user to set a distinctive ring for these applications.
Phone Options
Noise
Mode Provides options that describe the noise level in your environment.
Changing this mode to High or Severe adjusts the handset’s microphone and in-ear
speaker volume to account for background noise. Select Normal for most office
environments; High for moderate background noise; or Severe for extremely noisy
conditions. If you use High or Severe modes in a quiet environment, the person on
the other end of the line may find it difficult to hear your voice.
Key Tones Key tones may be turned on or off and determine if tones play when
keys are pressed. Key tones are enabled by default.
Warning Tones The handset plays various warning tones such as system up or
down, out of range, etc. These tones may be turned on or off and are enabled by
default.
Display Contrast The display may need to be adjusted for different lighting
situations. Contrast may be set by pressing the Up and Down side buttons until the
desired contrast is displayed and then pressing the OK softkey.
Keypad Autolock The handset may be set to lock the keypad automatically when in
standby mode. The automatic locking function of the keypad may be disabled (the
default) or adjusted for a 5, 10 or 20 second delay before locking.
System Info
Phone IP Addr
Displays the IP address currently assigned to the handset.
Firmware Version displays the software version running the handset. The MAC
address is the hardware identification number and is set at the factory. Three code
numbers correspond to the three files that each version uses.
(MAC address)
(downloader code) (functional code)
(phintl file)
OK Up
Downloader: pd11gl3.bin
Functional: pd11skd3.bin
Phintl: pi110001.bin
Extension Displays the extension currently assigned to the handset.
ID Name The ID Name permits an alphanumeric entry that will appear on the
standby display under the extension number. The entry technique uses cell phone
style entry where the key is pressed repeatedly to scroll through the characters for
that key, starting with the letter characters. Enter up to 16 characters.
CallManager IP Addr This option displays the IP Address currently assigned to the
CallManager.
Push-to-talk The NetLink i640 Wireless Telephone incorporates PTT functionality.
PTT may be allowed or disallowed in the Admin menu. If allowed, the user may
enable or disable locally, and may set the channel, tone volume and audio volume.