SpectraLink NetLink e340 - Manual (Page 37)

SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone
Cisco CallManager and IP Phone 7960 Emulation
72-1082-02-F.doc Page 37
Call handling
In order to accommodate four line appearances with two possible calls on each, the
handset display has been modified. The top row displays the signal strength icon, the
four line appearance numbers, the voicemail indicator (replaced by the downloader
icon when the handset is downloading code), a call status icon for each call,
navigation arrows, and the battery icon as shown below:
The tabs indicate which line and which call is active. In the above display, line one is
in an active call. The second call for line one is on hook.
Call status icons have the following states:
Call Status Icon Call State Description
On Hook The line is not in use.
Off Hook The line is in use. There is a dial tone or there is
an active call.
Hold The call has been placed on hold.
Incoming call ringing. Icons
flash through three views.
The line is ringing.
Outgoing call, ringing. Icons
flash between two views.
An outgoing call is ringing on the called party’s
line.
Shared line is in use. Icons
flash between two views.
The shared line is in use by another party and
is not available for incoming or outgoing calls.
Signal strength icon
Line numbers
Voicemail indicator
Call one status
Call two status
Navigation arrows
Battery icon
Tab Tab