SpectraLink NetLink e340 - Manual (Page 34)

SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone
Cisco CallManager and IP Phone 7960 Emulation
72-1082-02-F.doc Page 34
7. Feature Programming
The NetLink e340/i640 Wireless Telephone emulates the Cisco IP Phone 7960. All
telephone functions and messaging features are supported if possible. Functions that
require the use of the volume keys, speakerphone functions, and services settings are
not supported.
The handset uses “shortcut keys” to emulate the feature keys on the 7960. Pressing
LINE , FCN , or MENU plus a shortcut key will activate the assigned line appearance or
feature.
In the standby mode, the handset has four display rows. The top row displays the
signal strength icon, line numbers, a voicemail icon if there is a message waiting or a
downloader icon if the handset is downloading code, call icons, arrow icons, and the
battery icon. The second row displays the extension and identity of the handset as
assigned by the CallManager. The third row displays identification information as set
in the Standby menu. If the handset has been forwarded or is on hold, the third row
will cycle through the ID, forwarding, and hold information. The bottom row
displays the time and date as received from the CallManager.