SpectraLink NetLink e340 - Manual (Page 36)

SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone
Cisco CallManager and IP Phone 7960 Emulation
72-1082-02-F.doc Page 36
7.2 Feature Access
All features are viewed with the handset off hook. Press the Start Call button to go
off hook. To dial a call, you may use predialing by dialing the number and then
pressing Start Call and selecting the line.
Line appearances
Press the Line key to view a list of available line appearances and their assigned
extensions. To access a line and make a call, press the corresponding key. Press the
End Call button to exit the Line Appearance list.
Speed dial, Mute, Voicemail and OAI
Press the FCN key while off hook to display the Mute, Voicemail and OAI features
and the first four items in the speed dial list. Activate the feature by pressing the
corresponding key as shown on the display or by pressing the shortcut key. Press
FCN again to scroll through the programmed features. Press the End Call button to
exit the Function list.
Features
Whenever the handset is active, the softkey abbreviations display. Each feature
abbreviation is shown above the corresponding softkey. Pressing the feature’s
corresponding softkey or pressing the MENU key plus the shortcut key will activate
the feature. Press the MENU key for an expanded description of the softkey features.
Use the side buttons ( Up , Select , Down ) to scroll through the features. The Select
button will activate the selected feature. Pressing the softkey or shortcut key will
activate the feature even if it is not selected or shown on the MENU display. Press the
More softkey to display the next set of programmed features. Press the End Call
button to exit the Feature list.