Glossary – Sony DAV-IS50 User Manual

Page 100

Advertising
background image

100

US

Subwoofer (SA-WSIS50)

Speaker system

2 Way 2 Drivers
Subwoofer speaker system

Speaker unit

120 mm + 160 mm
(4

3

/

4

inches + 6

3

/

8

inches)

Rated impedance

4 ohms

Dimensions (approx.)

190 Ч 450 Ч 472 mm
(7

1

/

2

Ч 17

3

/

4

Ч

18

5

/

8

inches) (w/h/d)

Mass (approx.)

13.5 kg (29 lb 13 oz)

Power requirements

120 V AC, 60 Hz

Power consumption

On: 130 W
Standby: 0.3 W (at the
Power Saving mode)

Control unit (HCD-IS50)

Dimensions (approx.)

215 Ч 105 Ч 207 mm
(8

1

/

2

Ч 4

1

/

4

Ч 8

1

/

4

inches)

(w/h/d)

Mass (approx.)

3.0 kg (6 lb 10 oz)

Power output
(DIGITAL MEDIA PORT)

DC OUT: 5 V, 700 mA

Design and specifications are subject to change
without notice.

• Standby power consumption

0.3 W (or less).

• Halogenated flame retardants are

not used in the printed wiring
boards.

• Over 85 % power efficiency of

amplifier block is achieved with the
full digital amplifier, S-master.

Digital Cinema Auto Calibration

Digital Cinema Auto Calibration was developed
by Sony to automatically measure and adjust the
speaker settings to your listening environment in
a short period of time.

Dolby Digital

This movie theater sound format is more
advanced than Dolby Surround Pro Logic. In
this format, the surround speakers output stereo
sound with an expanded frequency range, and a
subwoofer channel for deep bass is
independently provided. This format is also
called “5.1” with the subwoofer channel
designed as the 0.1 channel (since it functions
only when a deep bass effect is needed). All six
channels in this format are recorded separately
for superior channel separation. Furthermore,
since all the signals are processed digitally, less
signal degradation occurs.

Dolby Pro Logic II

Dolby Pro Logic II creates 5 full-bandwidth
output channels from 2 channel sources. This is
done using an advanced, high-purity matrix
surround decoder that extracts the spatial
properties of the original recording without
adding any new sounds or tonal colorations.

x Movie mode

The Movie mode is for use with stereo television
shows and all programs encoded in Dolby
Surround. The result is enhanced sound field
directionality that approaches the quality of
discrete 5.1-channel sound.

x Music mode

The Music mode is for use with any stereo music
recordings, and provides a wide and deep sound
space.

Glossary

Advertising