Sony DAV-IS50 - Manual (Page 82)

82 US
x [HDMI RESOLUTION]
You can select the type of video signal that is
output from the HDMI OUT jack. For details,
see “To select the type of video signal output
from the HDMI OUT jack” (page 27).
* i: interlace, p: progressive
x [CONTROL FOR HDMI]
You can set the [CONTROL FOR HDMI]
function to on/off. This function is available
when you connect the system and TV with an
HDMI cable. For details, see “Using the Control
for HDMI Function for “BRAVIA” Sync”
(page 59).
Note
• When you set to [ON] without the HDMI connection
of the TV, [Please verify the HDMI connection.]
appears and you cannot set to [ON].
x [VOLUME LIMIT]
If you change the output method of the TV to the
system speaker on the TV menu or by pressing
THEATER, the System Audio Control
(page 61) is activated and loud sound may be
output depending on the volume level of the
system. You can prevent this by limiting the
maximum level of the volume.
Note
• This function is available only when [CONTROL
FOR HDMI] is set to [ON].
x [YC
B
C
R
/RGB (HDMI)]
You can select the type of HDMI signal output
from HDMI OUT jack.
Note
• If the playback picture becomes distorted, set
[YC
B
C
R
] to [RGB].
• If the HDMI OUT jack is connected to a component
with a DVI jack, [RGB] signals will be automatically
output even when you select [YC
B
C
R
].
Settings for the HDMI
[HDMI SETUP]
[AUTO(1920×1080p)] The system outputs the
optimal video signal for the
connected TV.
[1920×1080i] The system outputs
1920 × 1080i* video signals.
[1280×720p] The system outputs
1280 × 720p* video signals.
[720×480p] The system outputs
720 × 480p* video signals.
HDMI SETUP
CONTROL FOR HDMI:
HDMI RESOLUTION:
VOLUME LIMIT:
AUTO (1920x1080p)
OFF
LEVEL2
YC B C R
OFF
SD
YC B C R /RGB(HDMI):
JPEG RESOLUTION:
AUDIO(HDMI):
[OFF] Off.
[ON] On. You can operate mutually
between components that are
connected with an HDMI cable.
[LEVEL3] Maximum volume level is set to
15.
[LEVEL2] Maximum volume level is set to
20.
[LEVEL1] Maximum volume level is set to
30.
[OFF] Off.
[YC
B
C
R
] The system outputs YC
B
C
R
signals.
[RGB]
The system outputs RGB signals.