Sony DAV-IS50 User Manual

Page 96

Advertising
background image

96

US

The subtitles cannot be turned off.

• The DVD prohibits turning off subtitles.

The angles cannot be changed.

• Multi-angles are not recorded on the DVD being played (page 45).
• The DVD prohibits changing the angles.

A disc cannot be ejected and
“LOCKED” appears in the front panel
display.

• Contact your Sony dealer or local authorized Sony service facility.

[Data error] appears on the TV screen
when playing a DATA CD or DATA
DVD.

• The MP3 file/JPEG image file you want to play is broken.
• Data is not MPEG 1 Audio Layer 3 data.
• The JPEG image file format does not conform to DCF.
• The JPEG image file has the extension “.JPG” or “.JPEG”, but is not in

JPEG format.

The system does not work normally.

• Disconnect the AC power cord (mains lead) from the wall outlet (mains),

then reconnect after several minutes.

“DEMO PLAY” appears in the front
panel display.

• Contact your Sony dealer or local authorized Sony service facility.

The Control for HDMI function does
not work.

• When “HDMI” does not light up in the front panel display, check the

HDMI connection (page 20).

• Set the [CONTROL FOR HDMI] setting in [HDMI SETUP] to [ON]

(pages 60, 82).

• Make sure that the connected component is compatible with the Control

for HDMI function.

• Check that the AC power cord (mains lead) of the connected component

is connected securely.

• Check the connected component’s setting for the Control for HDMI

function. Refer to the operating instructions supplied with the
component.

• If you change the HDMI connection, connect and disconnect the AC

power cord (mains lead), or have a power failure, set the [CONTROL
FOR HDMI] setting in [HDMI SETUP] to [OFF], then set the
[CONTROL FOR HDMI] setting in [HDMI SETUP] to [ON] (page 82).

• For details, see “Using the Control for HDMI Function for “BRAVIA”

Sync” (page 59).

No sound is output from the system
and TV while using the System Audio
Control function.

• Set the [AUDIO (HDMI)] setting in [HDMI SETUP] to [ON] (page 83).
• Make sure that the connected TV is compatible with the System Audio

Control function.

• For details, see “Using the Control for HDMI Function for “BRAVIA”

Sync” (page 59).

• Check the connections.

Symptom

Remedy

Advertising