Sennheiser 2020 - Manual (Page 25)

23
Putting the components into operation
Inserting/Changing batteries or accupack in the
wireless microphone
For powering the wireless microphone, only use either
the rechargeable BA 2015 accupack
´
or two 1.5 V
AA size batteries.
̈
Unscrew the display unit
¿
in the direction of the
arrow (counterclockwise) on the handle of the
wireless microphone
·
.
̈
Pull out the display unit
¿
fully.
̈
Open the cover
Ƹ
of the battery compartment.
̈
Insert the batteries or the BA 2015 accupack as
indicated on the compartment. Please observe
correct polarity when inserting the batteries/
accupack.
̈
Close the cover
Ƹ
.
̈
Push the battery compartment into the handle of
the wireless microphone.
̈
Screw the display unit on again.
Note:
Always charge the accupack in the charging
compartment
³
of the charging case (see
“Charging the BA 2015 accupack” on page 30).
¿
·
¿
Ƹ