Sennheiser 2020 - Manual (Page 37)

35
Using the components
Muting the devices
Muting the bodypack transmitter
̈
Push the MUTE switch
·
to the left, to “ MUTE ”.
̈
The red LED LOW BATT/MUTE
¶
lights up
permanently. The MIC level display
ብ
no longer
shows any deflection. The bodypack transmitter is
muted.
Note:
The muting function ( MUTE ) mutes the microphone
input
»
only, not the line input
¿
. This function
enables a pre-recorded track to be played through
the line input without being disturbed by the tour
guide's microphone.
To deactivate the muting function:
̈
Push the MUTE switch
·
back to the right.
The red LED LOW BATT / MUTE
¶
goes out. The MIC
level display
ብ
and the LINE level display indicate
the current levels.
Muting the wireless microphone
̈
Twist the cap
²
at the base of the wireless
microphone until you can see the MUTE switch
¹
.
̈
Push the MUTE switch
¹
in the direction indicated
by the arrow.
“
MUTE ” appears in the display of the wireless
microphone. After 5 minutes “ CH OFF ” appears in
the display (“Display of the energy saving mode”
on page 14).
To deactivate the muting function:
̈
Push the MUTE switch
¹
back to transmit again.
LINE
CH 03
MIC
ብ ቦ
»
¿
²
¹