Sennheiser 2020 - Manual (Page 26)

24
Putting the components into operation
Inserting/Changing batteries or accupack in the
bodypack transmitter
For powering the transmitter, use either the
rechargeable BA 2015 accupack
´
or two 1.5 V AA
size batteries. Do not use any other rechargeable
batteries!
̈
Open the battery compartment by pressing the two
release buttons
ƹ
and open the cover
¿
.
̈
Insert the batteries or the BA 2015 accupack
´
as
shown in the diagram on the left. Please observe
correct polarity when inserting the batteries/
accupack.
̈
Close the battery compartment cover
¿
.
Connecting the microphone to the bodypack
transmitter
Note:
Suitable Sennheiser microphones are listed on
page 7.
̈
Connect the microphone to the bodypack
transmitter's microphone input
»
.
̈
Lock the plug by screwing down the coupling ring.
̈
Adjust the sensitivity of the microphone input, as
described on page 37.
Connecting external audio source to the bodypack
transmitter
You can connect an external audio source, such as a CD
player, MP3 player, tape player, etc. to the bodypack
transmitter. (Please note that you cannot connect a
second microphone.) Both signals – the microphone
ƹ
ƹ